| |
|
|
|
| |
Vintage Classic Head |
|
Modern Classic Head |
|
|
|
|
| |
The tonal signature of the WIZARD VINTAGE CLASSIC is reminiscent of the mid-sixties British tube amps. Two channels, one top-boosted and one for rhythm. Four inputs (high and low sensitivity per channel) are ideal for cross-patching, either for channel blending or amplifier ganging. |
|
From the soft sweet tones of a vintage amp to the blistering leads of high gain modern units, the WIZARD MODERN CLASSIC all tube amplifier has been designed to satisfy a wide variety of needs. |
| our price $CALL |
| |
our price $CALL |
|
|
| |
| |
Vintage Classic Combo |
|
Modern Classic Combo |
|
|
|
|
| |
The pre-amp section is simple and straight ahead, with only enough gain to drive the output stage to full saturation. At maximum output, the harmonic content is smooth and rich and the feel is punchy and full. Reducing the output produces a pure, clean tone. |
|
Foot-switching capabilities can take you from crystal clean to hi-po high gain. The aggressive tone section is coupled to a loud and tight output stage, with extended bottom end response. |
| our price $CALL |
| |
our price $CALL |
|
|
| |
|
|
|
| |
4x12 Guitar Cab |
|
2x12 closed back Guitar Cab |
|
|
|
|
| |
These 4x12 cabinets accurately reproduce the warmth and smooth characteristics of the original birch back mid sixties British cabinets.
|
|
100% Baltic birch construction, recessed steel handles, high quality speaker mounting hardware aluminum jack plates and Switchcraft jacks. |
| our price $CALL |
| |
our price $CALL |
|
| |
|
|
|
| |
2x12 closed back Guitar Cab |
|
2x12 Piggy back Guitar Cab |
| |
|
|
|
| |
With added cabinet depth and closed tight back in design, WIZARD 2x12 CLOSED BACK speaker cabinets have extended low-end response and are an ideal addition as Bottom-End extentions to 4x12 speaker cabinets. |
|
Designed to craddle 50 watt Wizard Amplifiers, WIZARD CLASSIC 2x12 PIGGY BACK speaker cabinet is also a matched addition as an extention cabinet to Wizard Combos |
| our price $CALL |
| |
our price $.CALLllllllll |
|
| |
|
|
|
| |
Bass 300 Head |
|
Bass100 Head |
| |
|
|
|
| |
High and Low sensitivity input jacks. Two channels paralleled, one for Bottom and one for High Treble. Power level suited for larger venus. Treble, Mid-Select, Mid-level and Bass controls. 2-4-8 ohm impedance selector. 300 watts minimum into 8 ohm. 6-6550/KT88 output stage |
|
Two channels, one top-boosted and one for bass. Four inputs (high and low sensitivity per channel) are ideal for cross-patching, either for channel blending or amplifier ganging. |
| our price $CALL |
| |
our price $CALL |
|
|
| |
|
|
|
| |
Bass 50 Head |
|
8x10 bass cab |
| |
|
|
|
| |
Two channels, one top-boosted and one for bass. Four inputs (high and low sensitivity per channel) are ideal for cross-patching, either for channel blending or amplifier ganging. |
|
Industry standard in mid to large venue live bass reproduction.
- Number of Speakers: 8 - 100 watt 10" custom speakers.
|
| our price $CALL |
| |
|
|
our price $CALL |
| |
|
|
|
| |
4x10/1x15 Bass Cab |
|
6x10 Bass cab |
| |
|
|
|
| |
Rock solid bass reproduction for mid to large venue applications through a combination of high powered, front loaded 10" drivers coupled to a matching 15" or 2 x 12" units housed in a high compression reflex design. |
|
Industry standard in mid to large venue live bass reproduction.
- Number of Speakers: 6 - 100 watt 10" custom speakers.
|
| |
our price $CALL |
|
our price $CALL |
| |
|
|
|
| |
4x10 Bass Cab |
|
2x15 Bass Cab |
| |
|
|
|
| |
Industry standard in small to mid venue live bass reproduction.
- Number of Speakers: 4 - 100 watt 10" custom speakers.
|
|
Industry standard in mid to large venue live bass reproduction.
- Number of Speakers: 2 - 400 watt 15" custom speakers.
|
| our price $CALL |
| |
our price $CALL |
|
| |
|
|
|
| |
1x15 Bass Cab |
|
|
| |
|
|
| |
Industry standard in small to mid venue live bass reproduction.
- Number of Speakers: 1 - 400 watt 15" custom speaker.
|
|
|
| |
our price $CALL |
|
|
| |
|
|
|